YUNEEC Typhoon H Plus Maintenance, Troubleshooting & Parts page 10

ST16S
Ground Station Control
o
Remove battery and inspect the ST16S battery connection for any discoloration or pitting (signs of a poor connection and causing over
heating) or damage. Clean as necessary.
o
Clean air vents & cooling fan using a vacuum (DO NOT use compressed air).
o
Clean Control sticks pivot points with small brush.
o
Lightly lubricate the control sticks if needed with a Teflon or Silicone spray.
o
Replace screen protector if necessary.
o
Check toggle switch retainer nuts for tightness.
o
Turn on ST16S and check cooling fan for noise, verify smooth operation.
o
Calibrate the ST16S controls.
Perform post-inspection flight
Log inspection/maintenance
Performed by
: _________________________________________________________________
100 FLIGHT MAINTENANCE Checklist
If performing Annual Flight Maintenance skip the following 2 steps.
NOTE:
Date: ____/______/________
pg 2 of 2
10