Main Frame Inspection; H/H Pro Main Frame Top W/Battery Frame On Bottom; H/H Pro Main Frame Bottom W/Battery Frame On Top; Check The (6) Arm Latch/Catch Screws Tight - YUNEEC Typhoon H Plus Maintenance, Troubleshooting & Parts

Main Frame Inspection

(2-piece frame)

H/H Pro Main Frame TOP w/Battery Frame on bottom

H/H Pro Main Frame BOTTOM w/Battery Frame on top

Inspect frame joists for cracks and give them a twist to verify they are properly mated to the frame. Check that screw posts are not broken,
loose or worn, remove screws and reattached with a SMALL amount of lock tight as needed.

Check the (6) Arm Latch/catch screws tight.

Inspect motor wire protective sleeve.
This is the new frame design for H+/H520 it is a one-piece design. (Main frame and Battery frame are molded as one, No screws to
hold Battery frame on)
Also it is lighter than the H/H Pro frame (not as beefy)
INSPECTION POINTS ARE THE SAME EXCEPT THE SIDES ARE A SOILD WALL AND MAY BE PRONE TO CRACKING??
17