Setting And Confirming The Sensor Source; Set And Confirm The Sensor Source - JRC JAN-7202 Instruction Manual

9.1.5 Setting and confirming the sensor source

9.1.5.1

Set and confirm the sensor source

1
Click on the [Menu] button at the bottom left corner of the screen.
The menu is displayed.
2
Click on the [Maintenance] - [Sensor Selection/Status] button on the menu.
The [Sensor Selection/Status] dialog box appears.
[1] [X] button
Click on this button to close [Sensor Selection/Status] dialog box.
Section 9 Maintenance & Inspection
[3]
9-10
[2] [1]