Selecting A Setting Item - JRC JAN-7202 Instruction Manual

The [Alert] dialog box consists of the classification pane and the edit pane.
By clicking the disclosure button (
classification pane again, click the disclosure button (
6.1.2

Selecting a setting item

1
Click the item you want to set up in the Classification pane.
The setting dialog of the selected item is displayed in the Edit pane.
2
Set up in the Edit pane.
The following items can be set in the [Alert] dialog box.
Setting item
Depth/Safety Contour
Position Integrity
(Position sensor
integrity)
AMS (Alert
Management System)
Section 6 Setting Up Alerts
), you can hide the classification pane. To show the
Set a condition for generating a Depth Below
Keel alarm for avoiding grounding.
Refer to "6.2 Depth/Safety Contour Alert
Generation Conditions".
Set the conditions for generating a position monitor warning and a HDOP
limit caution.
Refer to "6.3 Position Integrity Alert Generation Conditions".
Set the actions to be taken at the next stage for an unacknowledged alert.
Refer to "6.4 Setting Up Alert Processing".
6-2
).
Setting contents
Only "Depth Below Keel
alarm" can be set.