Setting Key Assignment - JRC JAN-7202 Instruction Manual

7.4

Setting Key Assignment

Select [Key Assignment] in the classification pane.
Set the keys in the operation unit and the function assigned to the [MULTI] dial in the setting dialog of
the edit pane.
Only the ítems whose funtions are available on the task screen are displayed on the screen.
The [User Keys] tab is displayed only when the optional operation unit is installed.
Setting Item
[User Keys] tab
User Key 1 Select a function to assign to the USER1 key on the
operation unit.
[User Key 1] is displayed only when the optional
operation unit is installed.
User Key 2 Select a function to assign to the USER2 key on the
operation unit.
[User Key 2] is displayed only when the optional
operation unit is installed.
[Multi Dial] tab
Display Brightness When this is selected, the display brightness
adjustment function will be manipulated with the
[MULTI] control.
It cannot be changed since power is always on.
Panel Brightness When this is selected, the operation unit brightness
adjustment function will be manipulated with the
[MULTI] control. This item is always displayed.
Description of Setting
7-7
Setting Value
Show Preset Menu
Capture Screen
Show Preset Menu
Capture Screen
To enable: Select.
To disable: Clear.
To enable: Select.
To disable: Clear.
Section 7 Setting Up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
16
16
19
20
21
22
23
24
25
APP A
APP B