Remote Update - JRC JAN-7202 Instruction Manual

9.6.2 Remote Update

When Enable RMS of the menu ［service］－［Installation］－［Settings］－［RMS］ is valid, if you need
to update the software, the installer will be downloaded automatically from the RMS server.
You can use this installer to update the software.
Memo
Once a day, at 12:00 automatically check the version of the updater on the RMS server to see if
software update is necessary, and if it needs updating, download it.
The completion of the download will be notified in the next popup.
1
Click on the [Menu] button at the bottom left corner of the screen.
The menu is displayed.
2
Change over to the second page using the page switching button, and click
[Maintenance] - [Software Update].
The [Software Update] dialog box appears.
3
Click on the [Software Update] button.
Section 9 Maintenance & Inspection 9-30