Turning On The Machine - GENTILIN CLINIC 3.40 Series Instruction Manual

Instruction Manual - Clinic 3.40 Compressors
pRIoR to IgNItIoN
bEfoRE tuRNINg oN tHE maCHINE tHE opERatoR IN CHaRgE muSt
makE tHE CHECkS INDICatED IN tab. 1.
No.
1
Make sure that no unauthorized persons are near the machine.
2
Make sure the machine is properly positioned.
3
Make sure all connections are properly made.
4
Ensure that the switch (18) is in pos. "OFF (0)".
5
Make sure the condensate drain valve is closed (12).
6
Use the Personal protective equipment (PPE) required.
7
Make sure you have read and understood all parts of this "Instruction Manual".
8
Make sure that after last use routine maintenance has been made.

tuRNINg oN tHE maCHINE

tHE autHoRIZED opERatoRS CaN tuRN tHE maCHINE oN oNLY aftER
THEY HAVE PERFORMED AS A COMPULSORY OPERATION, THE CONTROLS
DESCRIbED IN tHE CoNtRoLS tabLE bEfoRE uSINg tHE maCHINE IN
QuEStIoN It IS CompuLSoRY tHat tHE autHoRIZED opERatoRS REaD
aND tHoRougHLY uNDERStaND IN aLL paRtS tHIS maNuaL. It IS Com-
puLSoRY to kEEp tHE maCHINE out of REaCH of uNautHoRIZED pERSoNS.
It IS foRbIDDEN to tHE autHoRIZED opERatoRS to LEaVE tHE maCHI-
NE WItHout SupERVISIoN DuRINg tHE maINtENaNCE WoRkS.
THE MANUFACTURER HAS NO LIABILITY FOR INJURIES TO PERSONS, ANI-
maLS aND/oR tHINgS CauSED bY tHE INobSERVaNCE of tHE RuLES aND IN-
foRmatIoN DESCRIbED HEREIN.
Turn on the machine by moving the switch (18) in pos. "ON (I)" (the machine runs up to the
max. operating pressure at 8 bar and then stops automatically).
36
www.gentilinair.com
CoNtRoL
Tab. 1
MAN0340001 - 07/2019