Installation; Pneumatic Connection - GENTILIN CLINIC 3.40 Series Instruction Manual

Instruction Manual - Clinic 3.40 Compressors

INStaLLatIoN

gENERaL WaRNINgS
It IS CompuLSoRY to CompLY WItH tHE CoRRECt pRoCEDuRES of aS-
SEmbLY/DISaSSEmbLY aND CoNNECtIoN of CompoNENtS DESCRIbED
IN tHIS CHaptER.
tHE maNuaL HaNDLINg muSt bE IN CompLIaNCE WItH tHE REguLatIoNS oN
tHE "maNuaL HaNDLINg of LoaDS" IN oRDER to aVoID aDVERSE CoNDItIoNS
tHat INVoLVE RISk of INJuRIES to tHE baCk.
aLL opERatIoNS DESCRIbED bELoW aRE DoNE to pREpaRE tHE maCHINE RE-
aDY foR tHE opERatIoN.

pNEumatIC CoNNECtIoN

THE MANUFACTURER HAS NO LIABILITY FOR INJURY TO PERSONS, ANI-
MALS AND/OR THINGS, RESULTING FROM FAILURE TO OBSERVE THE WAR-
NINgS DESCRIbED aboVE.
IT IS STRICTLY PROHIBITED THE USE OF AIR TUBES (EXTENSIONS), FIT-
tINgS aND tooLS Not SuItabLE aND Not CoNfoRm to tHE REguLa-
tIoNS IN foRCE.
IT IS COMPULSORY TO USE AIR TUBES (EXTENSIONS), FITTINGS AND TO-
OLS, ACCORDING TO WHAT IS FORECAST IN THE "INSTRUCTION MANUALS"
pRoVIDED bY tHE maNufaCtuRERS.
The machine must be connected
upstream to a pneumatic system for
the production sterilized air (by custo-
mer) connecting, to the air outlet (20
- Fig. 1), the tube for air inlet of the
system equipped with a special fitting.
26
www.gentilinair.com
Fig. 1
MAN0340001 - 07/2019