Operator Manual
9. EcF Enter Current Shelved Mode Combination EnF
Enter the current shelved mode combination, "EnF" (Enter new Factory combination)
will be displayed.
10. EnF Enter New Combination Cnf
Select and enter the new combination. "CnF" (confirm new Factory combination)
will be displayed
11. Cnf Enter New Combination POC
Enter new combination again to confirm. POC (Pull Out Change key) will be
displayed.
WARNING:
Record the new combination and store it in a secure place. If this combination is
lost or forgotten, there is no alternate way to open the lock.
12. POC Remove Change Key EOP
Remove the change key. EOP (End Operation) is displayed.
13. EOP Power Lock EC
Turn the dial to the left (CCW) until EC (Enter Combination) is displayed.
14. EC Enter New Shelved Mode Combination OPr
Enter the new shelved mode combination by pressing those digits on the lock's
keypad. The numbers will be displayed on the LCD as they are entered. When the
combination has been correctly entered, the LCD will read OPr, meaning "OPen
right."
15. OPr Retract Bolt
Turn the Dial to the right (CW) to retract the bolt.
16. Close Door
17. Extend Bolt
Turn the Dial to the left (CCW) to extend the bolt.
© 2017 Nautilus Hyosung Inc. All Rights Reserved.
Chapter3. For the beginning operator
3-7