Cash Recycler (TCR) in bank branches or similar locations. Support Information ► If any question or installation error occurs while preparing for and installing MS500 in compliance with this manual, please contact maintenance staffs of Nautilus Hyosung. For the contact of maintenance staffs of Nautilus Hyosung, see the E-mail addresses and telephone numbers provided separately.
Chapter2. Introduction Chapter2. Introduction About the MS500 ► The MS500 is a versatile, easily maintained delivery system that can be modified to keep pace with the bank's changing needs. ► The benefits that the new concept MS500 provides are as follows.
Chapter3. Installation Information Chapter3. Installation Information Installation Environment and Spacing ► When you select the permanent location for your MS500, ensure that the physical environment meets the recommended temperature and humidity specifications supplied with the unit. The following conditions should be met before installing the equipment.
4. Move the MS500 to the installation site. PRECAUTION: MS500 machine is very heavy equipment and can cause injuries if not handled with caution. Read the following carefully. ▪ Firmly close the vault door and lock the door by turning the knob completely.
► To bolt down the MS500 using the Anchor Bolt Location Sheet (template), perform the following steps: 1. Ensure that the surface where the MS500 is to be placed is level so that the unit will not tip over when opening the upper/lower modules or the door.