User-Define Edid; Audio Control - Monoprice Blackbird 39671 User Manual

User-define EDID

There are four EDID® values that can be customized by sending the following command.
Note that to use the User-defined EDID, the 4-pin EDID DIP switch muse be in the 1111
position.
Command
EDIDW[xxxx].

Audio Control

Command
IISON.
IISOFF.
SPDIFON.
SPDIFOFF.
Function and Operation
Sets the user-defined EDID to [xxxx]. xxxx=1011, 1100, 1101, or
1110.
Operation:
1. Prepare the EDID file (.bin).
2. Set the 4-pin EDID DIP switch on the rear panel to 1111.
3. Send the command EDIDW1101. and receive the feedback
Please Send The EDID File!
4. Send the EDID file (.bin). If successfully uploaded, the
feedback is:
Received The File!
Length=256!
EDID1101 Update OK!
Description
Enables the balanced stereo
analog audio output.
Disables the balanced stereo
analog audio output.
Enables the digital optical
S/PDIF audio output.
Disables the digital optical
S/PDIF audio output.
26
Feedback Example
IIS_OUT_ON!
IIS_OUT_OFF!
SPDIF_OUT_ON!
SPDIF_OUT_OFF!