Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Monoprice 31056
Summary of Contents for Monoprice 31056
- Page 1 Blackbird™ 4K HDBaseT™ Scaler and 2x1 Switch P/N 31056 User's Manual...
-
Page 2: Table Of Contents
CONTENTS SAFETY WARNINGS AND GUIDELINES ............................3 INTRODUCTION ........................................ 4 FEATURES ..........................................4 CUSTOMER SERVICE ....................................5 PACKAGE CONTENTS ....................................5 PRODUCT OVERVIEW ....................................6 Front Panel ........................................6 Rear Panel ........................................7 SAMPLE CONNECTION DIAGRAM ..............................8 CONTROLS ..........................................8 Manual Switching .................................... -
Page 3: Safety Warnings And Guidelines
SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. This device is intended for indoor use only. ... -
Page 4: Introduction
INTRODUCTION This Blackbird™ 4K HDBaseT™ Scaler and 2x1 Switch is an HDBaseT transmitter, which can deliver HDMI® or VGA video at resolutions up to a compatible HDBaseT matrix or receiver (not included). It can extend a 1080p@60Hz video to distances up to 230 feet (70 meters) or a 4K@30Hz signal to distances up to 131 feet (40 meters). -
Page 5: Customer Service
If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-... -
Page 6: Product Overview
PRODUCT OVERVIEW Front Panel 1. POWER LED: The LED illuminates red when power is applied. 2. SIGNAL LED: The AUTO LED illuminates green when auto-switching is enabled. The HDMI LED illuminates green when the HDMI® input is active. The VGA LED illuminates green when the VGA input is active. -
Page 7: Rear Panel
Rear Panel 1. HDMI IN: HDMI® connector for connecting an HDMI video source device. 2. VGA IN: VGA connector for connecting a VGA video source. 3. AUDIO IN: 3.5mm analog stereo audio input for pairing audio with the VGA video signal. -
Page 8: Sample Connection Diagram
SAMPLE CONNECTION DIAGRAM CONTROLS Manual Switching Momentarily press the SOURCE/AUTO-3s button to switch between the HDMI® and VGA sources. The corresponding LED will illuminate green. If Auto Switching is enabled, this will turn it off and the AUTO LED will extinguish. Auto Switching Press and hold the SOURCE/AUTO-3s button for at least 3 seconds to turn Auto Switching on. -
Page 9: Volume Control
will switch to that input. Otherwise, the unit will scan the inputs with priority to HDMI® first, then will switch to the first input found. Signal Loss: If the currently displayed signal is lost, the unit will scan the inputs with priority to HDMI first, then will switch to the first input found. - Page 10 Baud Rate: 9600 (default) Data Bits: 8 Stop Bits: 1 Parity: None Download and install a third party RS-232 control software, such as CommWatch.exe, whose interface is shown below as an example.
-
Page 11: System Configuration
The switch can respond to the following RS-232 commands: System Configuration Command Function Feedback SFUD<CR><LF> Software upgrade Software Update GET VER<CR><LF> Check the software version Version Vx.x.x FRST<CR><LF> Restore factory default settings Factory Reset WAKE<CR><LF> Wake up the system Wake Up STBY<CR><LF>... -
Page 12: Audio Setting
Audio Setting AUMT S1<CR><LF> Mute source audio Audio Mute Source: Enable AUMT S0<CR><LF> Unmute source audio Audio Mute Source: Disable Increase the source volume to VOLS AP<CR><LF> Source Volume: xx xx (xx=0~60) Decrease the source volume to VOLS AN<CR><LF> Source Volume: xx xx (xx=0~60) Set the source volume to xx VOLS xx<CR><LF>... -
Page 13: Baud Rate Setting
Set Baudrate 2400 TECHNICAL SUPPORT Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates. -
Page 14: Specifications
SPECIFICATIONS Model 31056 1x HDMI®, 1x VGA, 1x 3.5mm stereo audio Inputs (to pair with the VGA signal), 1x 3.5mm IR in, 1x 3.5mm IR out, 1x 3-pin RS-232 Output HDBaseT™ Maximum HDMI Input Resolution 4K@60Hz 4:2:0 Maximum VGA Resolution... - Page 15 Blackbird™ is a trademark of Monoprice Inc. HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.