Rs-232 Commands; Device Control - Monoprice Blackbird 39671 User Manual

RS-232 COMMANDS

This section details all available RS-232 commands. These commands can be entered using
RS-232 control software or on the RS232 tab in the Web GUI.
Notes:
• In the following commands, the [ and ] characters are used to make it easier to read
the command. Do not enter these characters.
• The period at the end is part of the command and must be included for the
command to work.
• The commands are case sensitive, so enter them exactly as shown in the tables
below.

Device Control

Command
PowerON.
PowerOFF.
LOCK.
UNLOCK.
Baudrate[xxx].
GETGUIIP.
SETGUIIP[xxx.xxx.xxx.xxx].
STA.
Description
Turns the system on.
Turns the system off.
Locks the front panel buttons.
Unlocks the front panel buttons.
Sets the baud rate to [xxx].
xxx= 2400, 4800, 9600, 19200,
38400, 57600, or 115200
Reports the IP address of the
Web GUI.
Sets the GUI IP address to
[xxx.xxx.xxx.xxx].
Reports the system status.
24
Feedback Example
Power ON!
Power OFF!
Front Panel Locked!
Front Panel UnLock!
Example: Baudrate2400.
Feedback: Set Local RS232
Baudrate Is 2400!
GUI_IP:192.168.0.178
Example:
SETGUIIP:192.168.0.18.
Feedback:
SETGUIIP:192.168.0.18!
. . . . . . . .