Source Switching; Edid Management - Monoprice Blackbird 39671 User Manual

Command
RST.

Source Switching

Command
HDMI[x].
HDMIA.
HDMIM.

EDID Management

Command
EDIDR[xxxx].
EDIDUSE[xxxx].
Description
Rests the switch settings to the
factory defaults.
Description
Switch to input source [x].
x=1~4.
Note that input 4 is actually the
DisplayPort® input.
Enables automatic switching
mode.
Enables manual switching mode.
Description
Reports the preset EDID®. [xxxx]
represents the 4-pin DIP switch
status.
Invokes the preset EDID. [xxxx]
represents the 4-pin DIP switch
status.
Note: When invoking the preset
EDID, the 4-pin EDID DIP switch
must be in the 1111 position.
25
Feedback Example
Factory Default!
Feedback Example
Example: HDMI4.
Feedback:
HDMI Out Switch to 04!
HDMI Out Switch Auto
Mode!
HDMI Out Switch Manual
Mode!
Feedback Example
EDID_0001!
. . . . . . . .
EDIDUDE0001!
EDID_RS232&GUI_MODE!
EDID0001!