Table of Contents
Advertisement
WEB GUI CONTROL
The switch features a built-in Web GUI and the ability to be controlled from a computer
connected to the network. To use the Web GUI, you must first connect the switch to an
existing Ethernet network using a Cat5e or Cat6 Ethernet cable (not included). The default
IP settings of the switch are as follows:
Login
To access the Web GUI, open an internet browser on your computer, then type
192.168.0.178 into the address bar and hit enter. You will see the following login screen.
The default User Name and Password are:
Type the User Name and Password into the appropriate fields, then click the Login button.
IP Address:
Subnet Mask:
User Name: admin
Password: admin
13
192.168.0.178
255.255.255.0
Advertisement
Table of Contents
