Table of Contents
Advertisement
Command
CMDVOLUP
/+[y]/[z]:xxx.
Note that the above
command does not have
any spaces or breaks.
Description
When the VOLUME UP button is
pressed, sends the command
xxx to the third-party device at y
baud rate.
y=1: 2400 baud
y=2: 4800 baud
y=3: 9600 baud
y=4: 19200 baud
y=5: 38400 baud
y=6: 57600 baud
y=7: 115200 baud
z=0 or 1:
If z is 0, clears the saved
command xxx.
If z is 1, automatically sends the
command xxx to the third-party
device when the VOLUME UP
button is pressed.
31
Feedback Example
Example:
CMDVOLUP
/+3/1:111.
Feedback:
CMD_VOLUP Save
Success!
111
Advertisement
Table of Contents
