Monoprice 36652 User Manual

Monoprice 36652 User Manual

4k 2x1 dual displayport and usb kvm switch

Advertisement

Quick Links

4K 2x1 Dual DisplayPort® and USB KVM Switch
P/N 36652
User's Manual

Advertisement

Table of Contents
loading

Summary of Contents for Monoprice 36652

  • Page 1 4K 2x1 Dual DisplayPort® and USB KVM Switch P/N 36652 User's Manual...
  • Page 2: Safety Warnings And Guidelines

    SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference.  This device is intended for indoor use only. ...
  • Page 3: Customer Service

    If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com. Check the...
  • Page 4: Package Contents

    PACKAGE CONTENTS Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement. 1x 2x1 Dual DisplayPort® & USB KVM switch...
  • Page 5 Rear Panel 1. DC 5V: DC barrel connector for connecting the included AC power adapter. 2. Console Headphone: 3.5mm TRS jack for connecting a pair of headphones or speakers. 3. Console Microphone: 3.5mm TS jack for connecting a microphone. 4. Console Mouse: USB port for connecting a USB mouse. 5.
  • Page 6: Sample Connection Diagram

    SAMPLE CONNECTION DIAGRAM INSTALLATION 1. Power off and disconnect from its power source each device that will be connected to the switch. 2. Using a DisplayPort® cable (not included), plug one end into the DisplayPort input on your first monitor, then plug the other end into the Console DisplayPort 1 port on the switch.
  • Page 7 8. (Optional) Plug a USB hub and/or other USB devices into the Console USB ports on the switch. 9. Using a DisplayPort® cable (not included), plug one end into PC1 DisplayPort 1 port on the switch, then plug the other end into the first DisplayPort video output on your first computer.
  • Page 8: Technical Support

    USB device(s), verify that they work, as well. TECHNICAL SUPPORT Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates.
  • Page 9: Regulatory Compliance

    Modifying the equipment without Monoprice's authorization may result in the equipment no longer complying with FCC requirements for Class A digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
  • Page 10 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Table of Contents