Ir Remote Control; Auto Switching - Monoprice Blackbird User Manual

IR Remote Control

1. POWER SWITCH: Press the button to power
the unit on or to put it into standby mode.
2. MUTE BUTTON: Press the button to mute or
unmute the audio output.
3. ADJ BUTTON: Press the button to
automatically adjust the VGA screen settings.
4. INPUT BUTTONS: Press the HD1~4 and VGA
buttons to directly select the input. Press the
AUTO button to toggle automatic switching on
or odd. Press the arrow buttons to cycle
through the inputs.
5. RES BUTTON: Momentarily press the button to
access the Resolution screen in the OSD. Press
and hold the button for about 5 seconds to set
the output resolutions to 720p@60Hz.
6. MENU BUTTONS: Press the MENU button to enter the OSD menu. Press the EXIT
button to exit the OSD menu. Press the arrow buttons to navigate the OSD menu.
Press the OK button to select the highlighted menu option.
7. VOLUME BUTTONS: Press the VOL- and VOL+ buttons to adjust the volume. The
MIC- and MIC+ buttons are unused.

AUTO SWITCHING

The switch supports both automatic and manual switching modes. When automatic
switching mode is enabled, it functions according to the following principles.
 When a new input signal is detected, the unit will automatically switch to that
input.
 When the unit is powered off, it remembers the last selected input and will return
to that input when power is reapplied. If the last input is no longer available, the
8