ZyXEL Communications NWA Series User Manual page 92

Figure 48 Monitor > Log > View Log
The following table describes the labels in this screen.
Table 36 Monitor > Log > View Log
LABEL DESCRIPTION
Show Filter / Hide Click this button to show or hide the filter settings.
Filter
If the filter settings are hidden, the Display, Email Log Now, Refresh, and Clear Log fields are
available.
If the filter settings are shown, the Display, Priority, Source Address, Destination Address, Source
Interface, Destination Interface, Protocol, Keyword, and Search fields are available.
Display Select the category of log message(s) you want to view. You can also view All Logs at one
time, or you can view the Debug Log.
Priority This displays when you show the filter. Select the priority of log messages to display. The log
displays the log messages with this priority or higher. Choices are: any, emerg, alert, crit, error,
warn, notice, and info, from highest priority to lowest priority. This field is read-only if the
Category is Debug Log.
Source Address This displays when you show the filter. Type the source IP address of the incoming packet that
generated the log message. Do not include the port in this filter.
Chapter 8 Monitor
NWA/WAC/WAX Series User's Guide
92