ZyXEL Communications NWA Series User Manual page 41

Figure 17 NWA110AX, WAX510D and WAX650S LED
The following are the LED descriptions for your NWA110AX, WAX510D and WAX650S.
Table 12 NWA110AX, WAX510D and WAX650S LED
COLOR STATUS
Amber Blinks amber for 1 second
and green for 1 second
alternatively.
Green
Amber Blinks amber and green
alternatively 3 times and
Green
then turns solid green for 3
seconds.
Amber Blinks amber and green
alternatively 2 times and
Green
then turns solid green for 3
seconds.
Green Slow Blinking (On for 1
second, Off for 1 second)
Green Steady On
Chapter 3 Hardware
DESCRIPTION
The Zyxel Device is booting up or is connecting with NCC.
The Zyxel Device is discovering the NCC or an AC.
The Zyxel Device is managed by an AC but the uplink is
disconnected.
The wireless module of the Zyxel Device is disabled or fails, the
Zyxel Device is using default wireless settings, or the Zyxel
Device is configured to be managed by NCC but is not yet
registered with the NCC.
Note: WiFi networks on the WAX650S are turned off
The Zyxel Device is ready for use, the Zyxel Device's wireless
interface is activated, and/or wireless clients are connected
to the Zyxel Device in full power mode (see
67).
NWA/WAC/WAX Series User's Guide
41
automatically when it is connected to a device
that supplies power using IEEE 802.3af PoE.
Table 26 on page