ZyXEL Communications NWA Series User Manual page 278

Install Dibbler and select the DHCPv6 client option on your computer.
1
After the installation is complete, select Start > All Programs > Dibbler-DHCPv6 > Client Install as service.
2
Select Start > Control Panel > Administrative Tools > Services.
3
Double click Dibbler - a DHCPv6 client.
4
Click Start and then OK.
5
Now your computer can obtain an IPv6 address from a DHCPv6 server.
6
Example - Enabling IPv6 on Windows 7
Windows 7 supports IPv6 by default. DHCPv6 is also enabled when you enable IPv6 on a Windows 7
computer.
To enable IPv6 in Windows 7:
Appendix B IPv6
NWA/WAC/WAX Series User's Guide
278