ZyXEL Communications NWA Series User Manual page 38

Figure 15 NWA1123-AC HD LED
The following are the LED descriptions for your NWA1123-AC HD.
Table 10 NWA1123-AC HD LED
COLOR STATUS
Amber Blinks amber for 1 second
and green for 1 second
alternatively.
Green
Amber Blinks amber and green
alternatively 3 times and
Green
then turns solid green for 3
seconds.
Green Slow Blinking (On for 1
second, Off for 1 second)
Green Steady On
Amber Steady On
Bright Blue Steady On
Chapter 3 Hardware
DESCRIPTION
The Zyxel Device is booting up or connecting with NCC.
The Zyxel Device is discovering the NCC.
The wireless module of the Zyxel Device is disabled or fails, the
Zyxel Device is using default wireless settings, or the Zyxel
Device is configured to be managed by NCC but is not yet
registered with the NCC.
The Zyxel Device is ready for use, the Zyxel Device's wireless
interface is activated, and/or wireless clients are connected
to the Zyxel Device in full power mode (see
67).
The Zyxel Device is ready for use, the Zyxel Device's wireless
interface is activated, and/or wireless clients are connected
to the Zyxel Device in limited power mode (see
page
The Zyxel Device's wireless interface is activated, but there
are no wireless clients connected when it is in full power mode
(see
NWA/WAC/WAX Series User's Guide
38
67).
Table 26 on page 67).
Table 26 on page
Table 26 on