ZyXEL Communications NWA Series User Manual page 49

Figure 21 WAC6103D-I LEDs
The following table describes the LEDs.
Table 16 WAC6103D-I LEDs
LED COLOR
PWR/SYS Amber
Green
Green
Red
Chapter 3 Hardware
STATUS DESCRIPTION
Blinks amber for 1 The Zyxel Device is booting up.
second and green for 1
second alternatively.
On The Zyxel Device is ready for use.
Slow Blinking (On for 1s, The wireless module of the Zyxel Device is disabled or
Off for 1s) failed.
On There is system error and the Zyxel Device cannot boot
up, or the Zyxel Device suffered a system failure.
Fast Blinking (On for 50 The Zyxel Device is doing firmware upgrade.
ms, Off for 50 ms)
Slow Blinking (Blink for 3 The Uplink port is disconnected.
times, Off for 3s)
NWA/WAC/WAX Series User's Guide
49