Storm Control - ZyXEL Communications NWA Series User Manual

Table 38 Configuration > Network > VLAN (continued)
LABEL
PVID
VLAN Configuration
Add
Edit
Remove
Activate/
Inactivate
#
Status
Name
VID
Member
Apply
Reset

9.4 Storm Control

Traffic storm control limits the number of broadcast and/or multicast packets the Zyxel Device receives
on the ports. When the maximum number of allowable broadcast and/or multicast packets is reached,
the subsequent packets are discarded. Enable this feature to reduce broadcast and/or multicast
packets in your network.
Note: The maximum traffic rate can be changed using the CLI (see the CLI Reference Guide).
To access this screen, click Configuration > Network > Storm Control.
Figure 56 Configuration > Network > Storm Control
Chapter 9 Network
DESCRIPTION
This field displays the port number of the VLAN ID.
Click this to create a new entry. For features where the entry's position in the numbered list is
important (features where the Zyxel Device applies the table's entries in order like the SSID
for example), you can select an entry and click Add to create a new entry after the
selected entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings. In some tables you can just click a table entry and edit it directly in the
table. For those types of tables small red triangles display for table entries with changes that
you have not yet applied.
To remove an entry, select it and click Remove. The Zyxel Device confirms you want to
remove it before doing so.
To turn on an entry, select it and click Activate. To turn off an entry, select it and click
Inactivate.
This is the index number of the VLAN ID.
This field indicates whether the VLAN is enabled (a yellow bulb) or not (a gray bulb).
This field displays the name of each VLAN.
This field displays the VLAN ID.
This field displays the VLAN membership to which the port belongs.
Click Apply to save your changes back to the Zyxel Device.
Click Reset to return the screen to its last-saved settings.
NWA/WAC/WAX Series User's Guide
101