Steelcase 462 Leap Plus Instructions

Chair cover replacement

462 Leap

Plus Chair Cover Replacement Instructions

If you have a problem, question, or request, call

your local dealer, or Steelcase Line 1 at

888.STEELCASE (888.783.3522)

for immediate action by people who want to help you.

(Outside the U.S.A., Canada, Mexico, Puerto Rico,

and the U.S. Virgin Islands, call: 1.616.247.2500)

Or visit our website: www.steelcase.com

Grand Rapids, MI 49501

Page 1 of 3

U.S.A.

939546235 Rev B

Printed in U.S.A.

Table of Contents

Need help?

Do you have a question about the 462 Leap Plus and is the answer not in the manual?

Page 1 ® Plus Chair Cover Replacement Instructions If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522) for immediate action by people who want to help you. (Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S.
Page 2 Slide seat fully forward while holding the seat slide lever. Disengage the quick release located on the left side of the chair between the platesbetween the plates. SEAT SLIDE LEVER REAR FRONT REAR QUICK RELEASE TAB FRONT Page 2 of 3 939546235 Rev B...
Page 3 Unscrew the two (2) front BEARING PLATE screws to remove the bearing plate. NOTE: After the bearing plate screws are removed, the chair back is free to move. Hold the chair back firmly to avoid possible injury. Remove cowl as shown. Reverse steps to reassemble.