Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
Control Panel
FOR/REV
DRO Screen
Switch
Zeroing Button
mm/in. Button
Figure 1. Control panel functions.
ON Button: Turns machine ON.
Emergency STOP Button: Turns machine OFF
and prevents it from starting.
Forward/Reverse (FOR/REV) Switch: Starts,
stops, and reverses spindle rotation.
Digital Readout (DRO) Screen: Displays height
of the spindle in either inches or millimeters.
Zeroing Button: Adjusts height to 0 in./mm.
mm/in. Button: Displays cutter height in either
inches or millimeters.
-4-
manual
BEFORE
ON Button
Emergency
STOP Button
Inside Cabinet Controls
Motor Bracket
Handle
Figure 2. Cabinet control functions.
Spindle Assembly Lock Handle: Locks/unlocks
spindle seat to change spindle size.
Motor Bracket Handle: Engages and releases
V-belt tension.
Work Area Controls
Spindle
Elevation
Handwheel
Figure 3. Cabinet components.
Spindle Elevation Handwheel: Raises and low-
ers spindle and cutter to desired height.
Cabinet Access Door: Allows access to inside
cabinet to change spindle speed and size.
Model G0900 (Mfd. Since 03/20)
Spindle Assembly
Lock Handle
Cabinet Access
Door
Advertisement
Table of Contents
