Table of Contents
Advertisement
Guard Adjustment
Knobs
Cutterhead
Guard
Featherboard
Figure 4. Guard and table components.
Featherboards: Guide and support workpiece as
it moves past cutterhead.
Cutterhead Guard: Adjusts to protect user from
accidental cutter contact or chips thrown by
cutterhead.
Guard Adjustment Knobs: Adjust guard posi-
tion/height.
Miter Gauge (not shown): Supports workpiece
for controlled straight or angled cuts as it slides
along the work table miter slot.
Starting Pin (not shown): Supports workpiece
during beginning of freehand cuts until workpiece
contacts rub collar (refer to Page 31).
Model G0900 (Mfd. Since 03/20)
Miter Gauge
Location
Starting Pin
Location
Fence Assembly
Adjustment Knob
Micro-Adjustment
Knobs
Figure 5. Fence components.
Fence: Each fence is independently adjustable
side to side and front to back. Also removable for
easy replacement with a zero-clearance or other
custom-made fence.
Fence Lock Knobs: Tighten to lock fence posi-
tion on table.
Fence Micro-Adjustment Knobs: Move each
fence independently relative to cutterhead. One
turn moves each fence approximately
Fence Assembly Adjustment Knob: Moves
entire fence and guard assembly on table using
rack and pinion. One turn is approximately 1
movement across table.
Featherboard Adjustment Handles: Adjusts
featherboard position.
Featherboard
Adjustment
Handles
Lock Knob
(1 of 2)
Fence
/
" (.015").
1
64
/
" of
5
8
-5-
Advertisement
Table of Contents
