Table of Contents
Advertisement
Specifications
Motor: 5 HP, 220V, Single-Phase, 60Hz
Full-Load Current Rating: 18A
Motor Speed: 3450 RPM
Spindle Sizes: 3/4", 1-1/4"
Spindle Travel: 4"
Spindle Speeds: 5000, 7000, 10,000 RPM
Maximum Cutter Diameter: 7"
Table Size: 39-1/4" X 31-1/2"
Table Insert Sizes: 2-1/2", 4-1/8", 5-3/4"
Table Counterbore: 5-3/4" X 5/8"
Weight: 657 lbs.
202
203
G0900
205
207
REF PART #
DESCRIPTION
201
P0900201
MACHINE ID LABEL
202
P0900202
CUTTER HAZARD LABEL
203
P0900203
MODEL NUMBER LABEL
204
P0900204
SPINDLE ELEVATION HEIGHT LABEL
205
P0900205
GRIZZLY NAMEPLATE-LARGE
206
P0900206
GRIZZLY.COM LABEL
207
P0900207
ELECTRICITY LABEL
208
P0900208
READ MANUAL LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
BUY PARTS ONLINE AT GRIZZLY.COM!
-64-
Scan QR code to visit our Parts Store.
Labels & Cosmetics
201
WARNING!
To reduce risk of serious injury when using this machine:
1. Read and understand owner's manual before operating.
2. Always wear approved eye protection and respirator.
3. Avoid entanglement with moving parts—tie back long hair, roll up
long sleeves, and do not wear loose clothing, gloves, or jewelry.
4. Disconnect power before changing cutters or adjusting/servicing
shaper.
5. Before starting, ensure shaper is stable and properly set up, guards
are in place, and both spindle nuts are tight.
6. Always use overhead guard or a guarding fixture when free-hand
shaping or when adjustable fence is not in place.
7. Always keep fingers at least 6" away from spinning cutter—use jigs,
holding fixtures, or a power feeder when necessary to maintain a safe
distance.
8. Always feed workpiece against rotation of cutter.
9. Do not use awkward hand positions while feeding workpiece.
10. Reduce risk of kickback by taking multiple passes when removing a
large amount of material.
11. Never operate shaper while intoxicated, distracted, or tired.
12. Do not expose machine to rain or dampness.
13. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
ROTATING CUTTER!
Keep hands away during operation
and
only
operate
with
guard
installed.
204
215
206
WARNING
ACCIDENTAL INJURY
HAZARD!
Doors and covers
must be closed
and latched before
starting machine!
213
214
207
REF PART #
DESCRIPTION
209
P0900209
EYE/EAR/LUNG INJURY HAZARD LABEL
210
P0900210
ENTANGLEMENT HAZARD LABEL
211
P0900211
DISCONNECT POWER 220V
212
P0900212
SPINDLE SPEEDS LABEL
213
P0900213
CLOSE DOOR LABEL
214
P0900214
TOUCH-UP PAINT, GRIZZLY GREEN
215
P0900215
TOUCH-UP PAINT, GRIZZLY BEIGE
Model G0900 (Mfd. Since 03/20)
207
208
WARNING!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
209
INJURY HAZARD!
To reduce risk of short-
and long-term injury,
wear safety glasses,
hearing protection, and
a respirator when using
this machine.
210
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
211
DISCONNECT
POWER BEFORE
CHANGING
BLADE
SPEEDS!
212
5000
7000
10000
Spindle
Motor
Advertisement
Table of Contents
