Si041252EE
4. Horizontal Blades
Warning
Step
1
Release the center
shaft while bending the
horizontal blade (large)
slightly.
2
Release the left shaft.
3
Release the right shaft
and remove the
horizontal blade (large).
4
Remove the horizontal
blade (small) in the
same way.
Removal Procedure
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Procedure
Horizontal blade (large)
Horizontal blade (small)
The size of the blades is
different. When
reassembling, mount the
large horizontal blade to the
upper position and the small
horizontal blade to the lower
position.
Do not put them in the wrong
place.
(R18242)
(R13073)
Installation procedure
1. Since the key pattern hook is
provided, rotate the blade
and fit it to the right shaft
first.
2. Fit the blade to the center
Right shaft
and left shafts.
(R18243)
Horizontal Blades
Points
5