Electrical Box - Daikin FTKS09JV2S Service Manual

Electrical Box

6. Electrical Box
Warning
Step
1 Remove the screw and
remove the wire fixture.
2 Remove the 4 screws
on the terminal board
and disconnect the
connecting wire.
3 Disconnect the
connector [S1].
4 Disconnect the
connector [S41].
5 Release the harness for
the swing motors from
the hook.
8
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Procedure
Electrical box
Hook
Terminal
board
Connecting
wire
Wire
fixture
(R18696)
[S1]
(R13499)
[S41]
(R18694)
(R18695)
Si041252EE
Points
For U.S. models
When reassembling, make
sure that the connecting wire
is passed through the
conduit hole at the bottom of
the unit.
[S1]: fan motor
[S41]: swing motors
When reassembling, be sure
to put the harness for the
swing motors behind the
hook.
Removal Procedure