How To Use The Memory Switch; Start And Change Of The Memory Switch; Example Of The Memory Switch Setting - JUKI LK-1903A-305 Instruction Manual

[8] H�W T� USE THE MEM�RY SWITCH
The sewng machne operaton can be changed by changng the settng of the memory swtch.
1. Start and change of the memory switch
) When key s pressed n the state that the
sewng LED s put out, the memory swtch
settng mode s obtaned.
1.30 which is indicated when �M� key is
pressed indicates that the max. speed limitation
of the first memory switch is 3,000 sti/min. (State
at the time of delivery from the factory)
2) Change the memory swtch No. wth
key.
3) Adjust the memory swtch No. to the No. you
desre to change, and press
sewng LED lghts up.
4) Change the contents of the memory swtch
wth or
5) The value can be returned to the value at the tme of delvery from the factory wth
6) Press key to regster the contents of change. Sewng LED goes off and the mode returns to the
selectve state of the memory swtch No.
7) Press key to finalize the memory switch setting mode and the mode returns to the normal mode.
2. Example of the memory switch setting
(1) Setting the max. sewing speed limitation
Settng example : Settng the max. sewng speed lmtaton to ,800 st/mn
) Press key n the state that the sewng
LED s put out.
The memory swtch s started and the contents
of memory swtch No.  are ndcated.
It s not necessary to change the sewng
speed snce the max. speed lmtaton of the
sewng machne s set wth memory swtch
No. . The ndcated memory swtch No. can
be changed over wth
or
key. The
key.
or key.
－
e
Three figures from
the top are memory
switch Nos.
e
e
e
38
－
Two figures from the
bottom are contents
of setting.
key.