Table of Contents
Advertisement
(2) Installing the presser sensor detection plate
Detecting portion (leftward)
Fig. B
(3) Subassembling the AK motor
❸
❶
❺
❶
❷
❸
❶
❷
2.2 to 2.5mm
❷
❹
Fig. C
❹
Attach presser detector plate ❶ to knee lifter
1)
link plate ❸ with screw ❷ .
At this time, the orientation of presser detec-
tor plate ❶ should be as shown in Fig. B
Attach presser lifter motor ❶ to motor mount-
1)
ing plate ❷ with four hexagon socket head
bolts ❸ .
Attach cam ❹ to presser lifter motor ❶ with
2)
setscrew ❺ .
At this time, adjust the clearance provided be-
tween motor mounting plate ❷ and cam ❹ to
2.2 to 2.5 mm.
(See Fig. C.)
*
It is recommended to sub-assemble the parts
while putting a 2.5-mm hexagonal wrench key
between the motor mounting plate and cam
to obtain the clearance of 2.2 to 2.5 mm.
– 3 –
Advertisement
Table of Contents
