Xerox WorkCentre PE114e Service Manual page 53

5.13 SMPS
1. Before you remove the SMPS, you should remove:
- Rear Cover (see page 5-2)
- Side Covers (see page 5-3)
- Fuser Connector (see page 5-7)
- Engine Shield Ass'y (see page 5-11)
2. Unplug 1 connector and remove 3 screws then take
the Inlet Bracket out.
Inlet Bracket
3. Remove 1 screw and unplug 1 connector from the
Main PBA.
Disassembly and Reassembly
4. Remove 3 screws and take the SMPS out.
SMPS
Service Manual
5-13