Xerox WorkCentre PE114e Service Manual page 51

5.9 Fan
1. Before you remove the Fan you should remove:
- Rear Cover (see page 5-2)
- Right Side Cover (see page 5-3)
5.10 Drive Ass'y
1. Before you remove the Drive Ass'y, you should
remove:
- Rear Cover (see page 5-2)
- Left Side Cover (see page 5-3)
2. Remove the 6 screws from the Drive Ass'y.
Note when re-fitting the motor Drive Ass'y tighten the
screws in the order that they are numbered on the Motor
Drive Ass'y base plate.
Disassembly and Reassembly
2. Unplug the connector from the SMPS and remove 1
screw. Then take out the Fan.
3. Unplug 1 connector from the Drive Ass'y.
DC Fan
Drive Ass'y
Service Manual
5-11