Xerox WorkCentre PE114e Service Manual page 52

Disassembly and Reassembly
5.11 Engine Shield Ass'y
1. Before you remove the Fuser, you should remove:
- Rear Cover (see page 5-2)
- Side Covers (see page 5-3)
- Fuser Connector (see page 5-7)
5.12 Main PBA
1. Before you remove the Main PBA, you should
remove:
- Rear Cover (see page 5-2)
- Side Covers (see page 5-3)
- Fuser Connector (see page 5-7)
- Engine Shield Ass'y (see page 5-11)
Service Manual
5-12
2. Remove the 14 screws securing the Engine Shield
Ass'y and unplug the all connectors. Then remove the
Engine Shield Ass'y.
2. Unplug 1 connector and remove 5 screws from the
Main PBA. Then lift the Main PBA out as shown
below.
Main PBA
Engine Shield
Ass'y