Cleaning The Stainless Steel Surfaces; Scaling - Meiko M-iClean H Series Operating Instructions Manual

9.4
9.5
9750359

Cleaning the stainless steel surfaces

Caution
Material damage due to incorrect cleaning
Cleaning of parts made of stainless steel with unsuitable cleaning agents, care
products and cleaning utensils leads to damage, deposits or discolourations on the
machine.
•
Never use aggressive cleaning or scouring agents.
•
Never use cleaning agents that contain hydrochloric acid or bleaches based on
chlorine.
•
Do not use cleaning utensils previously used to clean non-stainless steel.
Caution
Material damage due to aggressive cleaning products
The use of aggressive cleaning and care products near the machine can cause
damage to the machine due to their fumes.
•
Make sure that the cleaning and care products cannot have direct contact with
the machine.
•
Do not use aggressive cleaning agents (e.g. aggressive tile cleaner) to clean
the surrounding area.
•
Please observe the notes on the product packaging.
•
In case of uncertainty, request information from the suppliers of these products.
We recommend that, when required, the stainless steel surfaces are cleaned exclu-
sively using cleaning and care products that are suitable for stainless steel.
•
Lightly soiled parts can be cleaned with a soft and possibly damp cloth or
sponge. For moistening we recommend only using demineralised water.
•
In order to prevent limescale, we recommend wiping the surfaces thoroughly
dry after cleaning.
De-scaling
Warning
Danger of injury from contact with acids
Descaling agents can cause damage to health if they come into contact with skin
or eyes or are swallowed.
•
Use eye protection.
•
Wear protective gloves.
•
Contact a physician immediately if chemicals or water containing chemicals
(rinse water) are swallowed.
•
Please take note of the manufacturer's safety instructions.
Operating the machine using hard water can result in the build up of limescale de-
posits in the boiler and the tank interior. If this occurs, it is necessary to descale the
tank interior, boiler housing, tank heating, boiler heating and the washing and rinse
systems.
Using service code "40044" you can reach authorisation level 4 (see page 44). Here
the "descale" function (for the wash tank) can be selected from the pull-down menu.
The descaling time and temperature can be adjusted in the i-Menu under the tab
"Dosing technology".
56 / 62