Reg 00H Strobe (Write Only) Register; Reg 01H Enable & Reset Register; Reg 02H Serial Data Out Force Register - Infinite Pasternack PE11S100 Series User Manual

7.2 Reg 00h Strobe (Write Only) Register

Bit Type
0 STR global_swrst_regs
1 STR global_swrst_dig
2 STR mcnt_resynch
3 STR tsens_spi_strobe
7.3 Reg 01h Enable & Reset Register
Bit Type
0 R/W malg_vcobug_en
1 R/W mag_bias_en
10:2 R/W Reserved
11 R/W pfd_lkd_en
12 R/W cp_en
13 R/W dsm_rstb
14 R/W lkd_rstb
15 R/W pfds_rstb

7.4 Reg 02h Serial Data Out Force Register

Bit Type
malg_sdo_driver_force_
0 R/W
val
malg_sdo_driver_force_
1 R/W
en
© 2019 Infinite Electronics, Inc. Pasternack is a registered trademark of Infinite Electronics, Inc.
Name Default
0
0
0
0
Name Default
1
1
479
1
1
0
1
1
Name Default
1
1
Description
Strobe to soft reset the SPI registers
Strobe to soft reset the rest of digital
Reserved
Strobe to clock the temp measurement on
demand
Description
VCO Buffer Enable
Bias enable
Reserved
Enable / Resetb to digital lockdetect circuit and
PFD's lockdetect output gates
Charge Pump Enable, disable is tri-stated output
1 - Enables fractional modulator
see also dsm_integer_mode Reg12h<3>
1 - enables lock detect circuit
CSP PFD FF rstb
1 - Enables the Cycle Slip Prevention (CSP)
feature of the PFD
Description
Serial Data Out Force value
This value may be forced onto LD_SDO by
setting malg_sdo_driver_force_en
Serial Data Out EN Force enable
Places value from malg_sdo_driver_force_val on
SDO
21