it 3900e Owner's Manual page 19

Innovative Photonics
The following window will open:
At the command prompt, type "ipconfig" and then Enter
The IP address of your computer is listed in the first line. When assigning the new IP address to the
lightsource, the first 3 "blocks" of the IP address must match your network's IP address (in this example
192.168.254) The last "block" however must be different than any other device on the network. This
number must be unique.
When assigning the new Subnet Mask and Default Gateway to the lightsource, they both must match your
network's Subnet Mask and Default Gateway exactly (in this example 255.255.255.0 and 192.168.254.1
respectively).
Returning to the DeviceInstaller, double click on the lightsource's current IP address to see all of the
parameters associated with the lightsource Ethernet port.
Revision 2 09/01/16
Illumination
Technologies, Inc.
Illumination Technologies, Inc.
102 Route 5 West, Building 2, Elbridge, NY 13060 USA
www.illuminationtech.com
28
Owner's Manual
Page 19 of