Hardware Monitor - Aaeon MAX-C246A Manual

Legacy USB Support [Enabled]
[Enabled]
[Disabled]
[Auto]
3.3.5

Hardware Monitor

The items in this menu allow you to configure the smart fan.
Smart Fan Configuration
CPU Smart Fan Control [Enabled]
Allows you to enable or disable CPU Smart Fan Control. Configuration options:
[Enabled] [Disabled]
The following sub-items appear only when you set CPU Smart Fan Control to
[Enabled].
Fan Control Mode [Smart Fan IV Mode]
Configuration options: [Manual Mode] [Thermal Cruise Mode] [Smart Fan IV
Mode]
The following item appears only when you set Fan Control Mode to [Manual
Mode].
PWM/DC Voltage Output [255]
Sets the voltage allocated for Fan Control. Input value range: [0~255]
The following items appear only when you set Fan Control Mode to [Thermal
Cruise Mode].
Target Temperature [50]
Input value range: [0~127]
Tolerance of Temperature [0]
Input value range: [0~7]
Fan Out Start-Up Value [127]
Input value range: [0~255]
3-6
Enables the support for USB devices on legacy operating
systems (OS).
USB devices are only available when running BIOS Setup.
Allows the system to detect the presence of USB devices
at startup. If detected, the USB controller legacy mode is
enabled. If no USB device is detected, the legacy USB support
is disabled.
MAX-C246A