Table of Contents
Advertisement
We value your experience using Sunny Health and Fitness products. For assistance with parts
or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 5:
NOTE: Do not pinch or cut any wires
when inserting the Handlebar Post (No.
5) into the Main Frame (No. 44).
5-1: Insert the Upright Tube Cover (No.
10) into the Handlebar Post (No. 5).
Move the Upright Tube Cover (No. 10)
higher. Connect Sensor Wire 1 (No. 6)
with Sensor Wire 4 (No. 9), and connect
Sensor Wire 2 (No. 7) with Sensor Wire
3 (No. 8). Insert all wires into the
Handlebar Post (No. 5). Once completed,
insert the Handlebar Post (No. 5) into
the Main Frame (No. 44).
5-2: Attach the Handlebar Post (No. 5)
to the Main Frame (No. 44) with 4
Screws (No. 41), 2 Washers (No. 42)
and 2 Flat Washers (No. 43) by Allen
Wrench (No. 120). Move the Upright
Tube Cover (No. 10) down until it snaps
into the Main Frame (No. 44).
STEP 6:
NOTE: Do not pinch or cut any wires
when attaching the Console (No. 1) to
the Handlebar Post (No. 5).
Remove the 4 Screws (No. 2) from the
back of Console (No. 1) by Spanner
(No. 119).
Connect the console wire 1-1 with
Sensor Wire 1 (No. 6), and connect the
console wire 1-2 with Sensor Wire 2
(No. 7). Insert all wires into the tube for
Handlebar Post (No. 5).
Attach the Console (No. 1) to the
Handlebar Post (No. 5) with the 4
Screws (No. 2) by Spanner (No. 119).
8
Hide quick links:
Advertisement
Table of Contents
