Errors And Codes - Fireco Dorgard X2 Fitting And Operating Manual

Errors and Codes

Error Code
Error
00 No Error
01 Batt warning flag
02 Batt low flag
04 Beacon loss flag
08 Tamper
10 Test fault flag
20 Plunger fault flag
40 Motor fault flag
80 Comms fault flag
It is possible to diognose faults with Dorgard X
System X's Full Range Test function. See System X User
Guide for more information.
Below are the error codes which can help diognose the
problem with your Dorgard X
displayed on the LCD on the System X transmitter, e.g.
'DG:xx' where 'xx' is the error code.
When diognosing a problem with a Dorgard X
System X's LCD will also display the Dorgards X
level and Signal strength. If Signal strength falls below
20% there is a chance of Dorgard X
call-ins. If the Dorgard X
fail-to-safe, within 60 seconds for a category A system, or
60 minutes when installed as a category B system.
2
Dorgard X will fail-to-safe when Battery level falls to 0%.
Error Description
2
Dorgard X operating normally.
Low Battery level in Dorgard X
Critically Low Battery level. Dorgard X
failed-to-safe.
Communication with System X failure.
Battery Lift not closed.
2
Dorgard X has missed its self-test command.
Plunger movement fault.
Possible problem with motor.
Communication with System X timed out.
26
2
. Note the error code is
2
2
failing due to missed
2
misses its call-ins it will
2
.
2
2
using
, the
2
Battery