Fireco Dorgard X2 Fitting And Operating Manual page 26

Error Messages, Beeps and Flashes continued
Beep/Flash Sequence
Error Modes
LoLoLoLo--(4secs)--LoLoLoLo--etc
**** **** **** ****
-- -- --
Key: * LED flash GREEN
O LED flash RED
What it means? Remedy
Dorgard X
---etc failed-to-safe.
25
2
has
1. Check System X LCD for
message. If Batteries are low
replace them.
2. Perform a Full Range Test.
3. Dorgard X
missed its reset command
from System X. Remove and
re-insert Batteries in the
Dorgard X
4. Dorgard X
missed 5 Call-in messages
in a row. Check System X
unit has not been moved or
anything which may deflect
radio signals has been
installed into the building.
Contact Technical Advice
line.
5. Has the building changed?
Building work or other
installation can affect
the installed system.
2
may have
2
unit.
2
may have