Removing The Link From Dorgard X - Fireco Dorgard X2 Fitting And Operating Manual

Removing the Link from Dorgard X

2
1. Ensure the Dorgard X
installed, and its Plunger down.
2. Using the plastic Screwdriver gently press the Link Button
on the front of the Dorgard X
until the LED located on top of the Dorgard X
red and the Dorgard X
beep. The Dorgard X
3. The association between Dorgard X
transmitter is now erased.
17
2
is powered on with Batteries
2
unit. Hold this Button down
2
motor drives, followed by a long
2
will fail-to-safe.
2
and the System X
2
unit lights