Fireco Dorgard X2 Fitting And Operating Manual page 19

Removing a Link from the System X transmitter
There are two methods of removing the Link between the
System X and its Dorgard X
Individually removing a Link:
1. On the System X transmitter, press Button 1 LINK and
Button 3 SCROLL together for 5 seconds to enter erase
mode. 'IND' is displayed on the LCD.
2. Use Button 3 SCROLL to choose the Dorgard X
removed.
3. Hold Button 6 RELEASE ON/OFF for 3 seconds, until the
LCD will display 'DONE'.
4. When finished the LCD will return to displaying the Clock.
Repeat this process to remove more Links.
Removing all Links:
1. On the System X transmi tter, press Button 1 LINK and
Button 3 SCROLL together for 5 seconds to enter erase
mode. 'IND' is displayed on the LCD.
2. Use Button 1 LINK, the LCD displays 'ALL'.
3. Hold Button 6 RELEASE ON/OFF until the LCD displays
'DONE'.
4. When finished the LCD will return to displaying the Clock.
Repeat this process to remove more Links.
Note. If, for example, Location code 005 is deleted, its
position is not replaced by 006. If another Dorgard X
is Linked to the System X transmitter it will be
allocated the first free space, i.e. will become DG 005.
Removing the Link will remove the association of the
2
Dorgard X from the list the System X will
communicate to, but the Dorgard X
Linked to that System X until it is re-Linked to
another System X transmitter.
18
2
; individually or all at once.
2
2
will still be
to be
2