Dorgard X 2 Operation - Fireco Dorgard X2 Fitting And Operating Manual

2
Dorgard X Operation
To hold the door open:
1. Open the door to the required position.
2. Stand sideways to the door.
3. Depress the Plunger down using your foot. Greater foot
pressure may be needed depending upon the force from
the door closer or the type of floor surface.
4. Whilst depressing the Plunger, push/pull the door gently in
the direction of closing.
5. Remove your foot and let go of the door.
To release Dorgard X
A. Lightly tap the Plunger towards the fire door with your
foot.
or;
B. Push the door in the direction of opening.
Note. If the door has been pushed hard against the
Floorplate Bump Stop or a wall, then Dorgard X
only release by method A.
14
2
, either:
2
will