Replacing A Bps - Huawei PowerCube 5000 User Manual

PowerCube 5000
User Manual (SmartLi 100Ah)
Figure 9-6 Replacing an HSU
Step 4 Install the new HSU.
----End

9.1.4 Replacing a BPS

Prerequisites
When replacing a BPS, avoid damaging the connectors behind it. Place the BPS horizontal on
the ground. Vertical placement is forbidden.
Procedure
Step 1 Unlock the BPS panel.
Step 2 Remove the screws that secure the BPS and remove the BPS.
Issue 02 (2020-03-17) Copyright © Huawei Technologies Co., Ltd.
9 Parts Replacement
130