Check W-Wan Signal Strength - Digi WR41v1 Test

Click Apply
Now Navigate to:
Management - Connections > PPP Connections > PPP 1
Click "Drop Link" and refresh the page by clicking >PPP 1
You may need to wait up to 5 minutes
A valid IP address for SIM 2 should be seen – Notice it is different to the one assigned for SIM 1
If a valid IP address is NOT found, please download debug.txt and email this to Digi technical support
for assistance.

8 CHECK W-WAN SIGNAL STRENGTH

Whilst the internet link is still connected from step 7, access the CLI (Command Line Interface) and
issue the following command: "modemstat ?"
Page | 19