Removal Procedure
Removal Procedure
10.2 Removal Procedure of Indoor Unit
Warning
Be sure to wait for a minimum of 10 minutes after turning off all power supplies before disassembly.
Model:
18K
Sleeve
80
Procedure
Display board
Guide louver
Note
1. Before disassembly
2. Remove panel and Display Board
A: Open the front panel.
B: Loosen the screws of the display board with
screwdriver.
C: Push the rotor shaft on both sides of the panel
to make it separate from the groove. Remove
the panel.
3. Remove guide louver
Remove axial sleeve of guide louver.