Hyundai HRP-S09WH Service Manual page 19

Function and Control Function and Control
ON/OFF button
Press this button can turn on or turn off the air conditioner.
MODE button
Press this button to select your required operation mode.
● When selecting auto mode, air conditioner will operate automatically according to ex-factory setting. Setting temperature can't
be adjusted and will not be displayed as well. Press "FAN" button can adjust fan speed. Press "SWING" button turn on or turn
off the swing function.
● When selecting cool mode, air conditioner will operate under cooling mode. Press "
temperature. Press "FAN" button to adjust fan speed. Press "SWING" button to turn on or turn off the swing function.
● When selecting dry mode, the air conditioner will operate in fan1, fan speed can't be adjusted. Press "SWING" button to turn on
or turn off the swing function.
● When selecting fan mode, the air conditioner will only blow, no cooling and no heating. Press "FAN" button to adjust fan speed.
Press "SWING" button to turn on or turn off the swing function.
● When selecting heat mode, the air conditioner will operate in heating mode. Press "
temperature. Press "FAN" button to adjust fan speed. Press "SWING" button to turn on or turn off the swing function. (Cooling
only unit won't receive heat mode signal. If setting heating mode with remote controller, press ON/OFF button can't start up the
unit).
Note:
● To preventing cold air, after starting up heating mode, indoor unit will delay 1~5 minutes to blow air (actual delay time is
depend on indoor ambient temperature).
● Seting temperature range from remote controller: 16~31°C; Fan speed: auto, quiet, fan1, fan2, fan3, fan4, fan5, stepless
speed.
and button
Press " " or " " button once to increase or decrease 1℃ of temperature. Holding "
remote controller will change quickly. On releasing button after setting is fi nished, temperature indicator on indoor unit will
change accordingly. (Temperature can't be adjusted under auto mode)
When setting TIMER ON, TIMER OFF, press "
SWING button
Press this button can turn on or turn off the swing function. When swing function is on, "
controller.
FAN button
Pressing this button can set fan speed circularly as: auto (AUTO), quiet(QUIET), fan1(
), fan5 (
Note:
● In AUTO speed, air conditioner will select proper fan speed automatically according to ambient temperature.
● Fan speed under dry mode is fan1.
● No quiet fan speed under FAN mode.
● After entering the stepless speed function, users can adjust the fan speed according to the button "
TURBO button
Press this button to turn on or turn off the turbo function in cool、heat、fan mode. When turbo function is on, " TURBO " icon is
displayed on remote controller.
Note:
● Press "FAN" button the unit will quit this function.
● This function is no use in auto mode or dry mode.
● When start turbo function, quiet fan speed will quit automatically.
16
Auto Cool Dry
" or "
), stepless speed.
AUTO
stepless speed
Fan Heat
" button to adjust time.(Refer to " TIMER " button)
QUIET
fan1 fan2
fan5
" or " " button to adjust setting
" or " " button to adjust setting
" or " " button, temperature on
" icon is displayed on remote
), fan2 ( ) , fan3 (
fan3
fan4
" or "
) , fan4 (
".