Hyundai HRP-S09WH Service Manual page 91

Removal Procedure Removal Procedure
Screw
Isolation sheet
88
Procedure
12. Remove 4-way valve assy
Unsolder the spot weld of 4-way valve assy,
compressor and condenser, and then remove
the 4-way valve assy .
Discharge the refrigerant completely before
4-way valve assy
unsoldering,when unsoldering, wrap the gas
valve with awet cloth completely to avoid
damage to thevalve caused by high
temperature.
When unsoldering the spot weld, wrap the
4-way valve with wet cloth completely to avoid
damaging the valve due to high temperature.
13. Remove isolation sheet
Remove the screws fi xing the isolation sheet
and then remove the isolation sheet.
Note
Warning